Good afternoon, I just signed up for a pilot program that monitors and regulates electricity consumption during peak demand loads for A/C window units,  washer,dryer done through ComED, the Citizens Utility Board and Greenlet A tech company with a new idea. A plug-in at the outlet and a router to the database to record and control these appliances during peak load times. with the weather we have been having(hot) it should be interesting. My "test lab" continues. Stay tuned

Greenlet kit for Consumers: A small kit is sent by mail to customers for quick and easy self-installation. Consumers connect each Greenlet unit to an appliance, which connects the gateway to the local router. There is no need for professional installation or knowledge and installation takes less than 5 minutes. The Greenlet system automatically registers on the Web application. Greenlet frequently sends power consumption information to the management system. Through commands received, the Greenlet system controls appliances (e.g.: stop/postpone usage) and regulates power.

Views: 452

Reply to This

Replies to This Discussion

I just received the greenlet package this is the plugin to the outlet

Attachments:

Sounds very much like what OG&E is doing with smarthours. The main difference is OG&E is going for the "big boy" the central A/C unit. Professional installation of the thermostat is required but it's provided to customers free of charge. Users can log onto myogepower to get hourly updates on total energy use for their home. Lower prices during off peak hours encourage shifting of loads. No load control devices have been implemented other than the Thermostat. In the future water heaters, pool pumps, and hot tubs could be added. The 120v device unloading is nice, but pales in comparison to a 4000W heating element or a 2000W pump.

I think gearing for window units think NY not much central air

Is there any financial incentive for customers to install the devices in their homes?

There is Bob, you get $20 per window unit for participation in the program. You also have some sort of energy use information tied into ComED. I will have to wait until the end of the month for energy use info. It has been rather cool here so I don't think we'll be having peak loads anytime soon. Stay tuned

I went onto the site and it is running. I started a load of laundry and it is showing 577w real time 433w for A/C in kitchen and 749w for living room. so it does show real time usage on the major appliance loads (not the fridge) By plugging in a greenlet to the washer thats another $20. Once I let this log data for a while, I'll see if i can get some useful info. After turning everything off I see 3w of phantom load on either 1 appliance or 1w on all three appliances. The lab continues. It also shows 1Kwh for the last 24hrs.

Is the $20 a 1 time thing or does it repeat every month? Is there a way to prevent dishonesty such as hooking up the A/C to a different outlet?

Yes it is a one time thing. As far as dishonesty, I don't know how it would be advantageous to hook the A/C to a different outlet. I feel that by seeing exactly what the A/C is using I can make an informed decision on whether or not I need to upgrade the unit with a more energy efficient one. When I look at the graph of usage from my washer I now realize the elec use through the different cycles: water fill,wash, rinse(spin), fill,wash,rinse. I haven't done the numbers yet but when I do I will know exactly what it costs to do a load of laundry. This will probably stop bad behavior(from an energy point of view) like washing 1 pair of jeans. The lab continues.

RSS

Forum Discussions

What made this chimney fall down?

Started by Eric Kjelshus in General Forum. Last reply by Eric Kjelshus on Tuesday. 7 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by Dave Taylor Nov 11. 61 Replies

Manual J (SD) for custom, luxury homes

Started by Dav Camras in HVAC. Last reply by Dav Camras Nov 10. 3 Replies

Quantitative methods for residential zoning

Started by Brett in HVAC. Last reply by David Butler Nov 9. 1 Reply

Home Energy Pros and #MeToo

Started by Mike Rogers in General Forum. Last reply by Mike Rogers Nov 9. 3 Replies

Latest Activity

Don Fugler added a discussion to the group HVAC
Thumbnail

joining ducts

A question came up on exhaust duct connections. I have always considered screws necessary for…See More
40 minutes ago
Don Fugler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
48 minutes ago
Profile IconSonny Roncancio and Chester Energy & Policy joined Home Energy Pros Forum
21 hours ago
Ryan Moore updated an event
Thumbnail

LEED for Homes Green Rater Training at Fort Collins, CO

December 7, 2017 to December 8, 2017
Green Insight will host this 2-day training in Fort Collins, CO December 7-8,…See More
yesterday
Rodney Bailey liked Rodney Bailey's discussion Energy audit equipment for sale.
yesterday
tedkidd liked Mike Rogers's blog post Focusing on payback to motivate customers?
Thursday
Home Energy Magazine's blog post was featured
Wednesday
Home Energy Magazine posted a blog post
Wednesday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service