I've heard that measured performance of actual, installed geoexchange systems can be much lower than advertized COP numbers.

Is anyone aware of any accessible, reliable reports about real-world performance of these systems?

If not an academic-level paper, anyone have any good anecdotal information?

Thanks in advance,

Doug

Tags: geothermal

Views: 2834

Reply to This

Replies to This Discussion

Residential Ground-Source Heat Pumps: In-Field System Performance and Energy Modeling

by Srikanth Puttagunta, Robb A. Aldrich, Douglas Owens, and Pallavi Mantha

Steven Winter Associates, Inc., Norwalk, CT

GRC Transactions, Vol. 34, 2010

http://www.builditsolar.com/Projects/SpaceHeating/InField%20Perform...

This page has a link to a Manitoba Hydro study, as well as the Steven Winter study:

http://www.mge.com/home/appliances/heatpumps/

The Feb. 2013 issue of Energy Design Update has an interview w/ Steve Kavanaugh, ASHRAE fellow and heat pump guru. He's calling out the industry on misleading ratings, and he's a long-time GSHP researcher (literally, wrote the book on GSHPs).

 

This page allows you to compare heating costs using different heating systems. As always, choose your assumptions carefully:

www.eia.doe.gov/neic/experts/heatcalc.xls

Thanks Danny Parker, for the link to the study.

Jon

Natural gas is hard to beat for fuel cost, it's the deliver/meter charges that get you. Gas is only 50 cents per therm in our area but the meter fees add up to $360/yr. For people with well insulated homes the meter fee doesn't justify having gas installed in the home. If you have a gas meter installed, make ALL appliances natural gas. Based on our local electric/gas price structure if your house is well insulated going all electric with a standard heat pump will be the most economical operation. Our local electric company has about 1/2 price power for use over 600KWH in winter. For the most part Geothermal makes no economic sense in our area, but I see a few systems installed. Over half of all electric homes use RESISTANCE HEAT as the primary heating method. They won't pay $800 for a normal heat pump, much less $10K+ for geo.

"Why is further geothermal heat pump research needed in cold climates?

The measured performance of geothermal heat pumps in cold climates in studies that we are aware of suggests that heat pump systems don't work as efficiently as people would expect. We also have heard from customers who have geothermal heat pumps and are unhappy because they see higher heating costs than they expected."

http://bit.ly/GroundVSairSource

I have a Water Furnace Envision V in my own home. Open vaulted environment with 23' ceilings. 2000 square feet. North wall is 75% glass with Low-E, low-U and low SHGC. Demilac SealEction 500 foam encapsulation of vault, walls, floor. The Envision has the domestic hot water/desuper heater feature. I DO NOT have any electric resistance back-up strips. Winter heating mode daily average consumption is 10-15 kilowatts. Purrs like a kitten...  Average year-round daily consumption is 9-kilowatts. Again...no back-up heat strips or dual fuel. 

This gets me to thinking about the installation cost of Geo. I'm thinking if your unit can do the job w/o any heat strips it's on the large side relative to the load in your home. With Geo, a lot of the installation cost is the ground loop. If the Units were sized for cooling load the downsizing may make the installation practical where it may otherwise not be. Running heat strips for a few of the coldest winter nights could be cheaper than installing another ton or 2 of ground loop and ductwork.

"I'm thinking if your unit can do the job w/o any heat strips it's on the large side relative to the load in your home."

Could be...could be not. Much depends on the climate. In some areas (south) cooling load exceeds heating load. In north Florida that is often the case. We do incorporate heat strips with air source heat pumps, mostly for defrost cycles, but we do not include heat strips with geo systems.

My bad, I wasn't considering the deep south.

Following Curt's comment - a house this well insulated and air tight, & possibly with thermal mass, may not really experience the "peak" load you think about with a leaky house in Upstate NY (or anywhere else)...  Mass, and insulation thermal inertia, can really flatten out cold spikes.  

 At 2000 sf, might be hard to find a Geo system that would be "undersized" and require supplemental heat.  

Thermal inertia is NOT considered in Manual J calculations!! Equiptment can be sized a bit smaller once inertia is considered, just don't expect quick recovery times.

Strip heat will be a requirement mostly north of NC. The amount it requires is a fraction of an air source unit. The amount of EH is so small it could cost $10 or less per year, the max I've seen is about $100/yr.

Geo outperforms every other option I've modeled. The real difference is the disparity at how they are rated. A 19 SEER HP actually Is only 12 SEER at 95 degrees. The variation in efficiency along its glide of operation could be up to 70% range, Geo is about 13%. NG is still priced without tax and regulation, and because of the lack of infrastructure to export it is keeping price based on it not being globally priced, US about $4, UK about $10/mill btu's. when our NG it will be priced globally like oil is. Payments on a Geo system usually is less than the amount saved each month giving positive cash flow from day one. Also when doing economic modeling make sure you utilize fuel escalation rate, I conservatively use 8%. Good luck, live and breathe Geo, if you don't believe how can you expect a customer to????

Bob P

With NG at current prices, no way Geo will ever have a reasonable payback time. Geo's real market is all electric homes, or those on oil/propane.

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 16 hours ago. 15 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah 20 hours ago. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

tedkidd replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"Yeah. Gas water…"
9 hours ago
Eric Kjelshus replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"With super cheap natural gas prices now, still worth going all electric?  Tankless needs a lot…"
10 hours ago
Stuart Langley liked Chris Clay's photo
15 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Stuart, I wasn't considering the copula windows... yes, those would indeed need to be…"
16 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"Well, @David Butler, you have seen the property more accurately than I have, but my impression of…"
16 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
17 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
18 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
18 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service