This is an interesting article. HERE. Individually, we may never come across such a situation, but it may make for something to keep in the back of our minds. Probably more so to dismiss the possibility when asked by a customer than anything else.

But, has anyone run into this? What are the signs to look out for?(besides the obvious as noted in the article) Would any of our standard instruments pick up on it? ie(in my case as an example): CO monitor(Sensit P100), leak detector(Sensit TKX), or combustion analyzer(Testo 327-1)?

From my highly detailed, nearly doctorate level of education regarding meth labs-I watched the first few seasons of Breaking Bad (A great show)- I know that the lab rats can use a number of different chemicals in the production, but how might some present themselves in a residual manner or while deteriorating?

Views: 185

Reply to This

Replies to This Discussion

These things are important hidden issues. Similar concern with Cannabis grow rooms, which have become surprisingly widespread. Major energy use, as well as potential

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 5 hours ago. 34 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco Oct 16. 1 Reply

Latest Activity

David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
5 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
9 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
10 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
10 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
10 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"It kind of depends on the PIC. Not all insulation is made the same. Here in VT (and all of New…"
10 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Filling those shallow valleys with rigid foam not only prevents primary foam panels from…"
10 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"Bill, you just posted a number of responses in different areas of the thread. I will try to respond…"
15 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service