Hi All,

I am trying to figure out a good flow grid system to use for testing airflow in 2 to 5 ton forced air systems.

Any favorites?

Or, if you prefer a flow-hood, please tell my why.

The flow hoods I've used take up more space in my vehicle than I would like.

Thanks for your thoughts.

George

Tags: flow, hoods, tools

Views: 202

Reply to This

Replies to This Discussion

I have 3 hoods - low flow ( 10-500 CFM)  Med flow (40-1500 CFM)  high flow (50-2000CFM) Open grid  for kitchen hoods. Plus hot wire plus presser plus other testing tools.   I test the air flow 3 ways  on each major job just to make my point or so I do not mess up.    Flow hoods have been used for 70 years and there's a lot of groups to help get it right.   look at http://www.trutechtools.com ,  www.nationalcomfortinstitute.com,  www.nebb.org,  https://www.aabc.com/www.tabbcertified.org.  I hope this helps some 80% air systems do not have the air flow to keep the unit on high limit.  

Thanks Eric!

Assuming that you're mainly interested in the total air handler flow, and you have access to the filter slots, I'd suggest looking at Energy Conservatory's TrueFlow.  It's a flat plate with openings; it has adapter plates for a variety of filter slot sizes. You'll also need to drill a hole in the supply plenum (or otherwise get a pressure tap in there).

  http://www.energyconservatory.com/products/trueflow%C2%AE-air-handl...

I like the flat true flow plate when it fits-  if not the by pass is very very large.   Or if the presser is to high  its off some.   I have used 4 True flow plates  on a 2 ton spit system to find air flow.    Quick way is just use paper work that comes with the air handler ( you know the knee pad that come with the unit)  find the right unit using the right MO #  then total CFM reading the fan performance data at a constant speed chart.  to find Total SP use your blower door meter with a SP gauge both side of  motor, 3 of 10 will be off with high turbulence.  Have some fun with it and write about it I will be looking for your comments. 

If you wanted more information on the TrueFlow plate, the manufacturer is offering a webinar on it today: https://events-na11.adobeconnect.com/content/connect/c1/1097690081/...

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by Brad Cook 17 minutes ago. 27 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco Oct 16. 1 Reply

Latest Activity

Brad Cook replied to David Butler's discussion How would you insulate this roof?
"Bill, you just posted a number of responses in different areas of the thread. I will try to respond…"
17 minutes ago
Donald Hester liked Marc Tannenbaum's blog post 3 Issues HVAC contractors Should Know About Impacting Customer Comfort and Health
19 minutes ago
Profile IconAlice Quinn and Donald Hester joined Home Energy Pros Forum
30 minutes ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"In an earlier response, I noted that we COULD haul drinking water and use the water we collect off…"
50 minutes ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"As to the elevations on the cupola – the existing windows up there might survive adding…"
52 minutes ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The purlins are 1 3/4" thick. I believe the top chord of the trusses are 10" deep (but…"
54 minutes ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The cupola windows are the only place there would be a problem if 4" of foam were added above…"
55 minutes ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The purlins are 1 3/4" thick. I don’t know about the fire dangers of PIC or other foams.…"
57 minutes ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service