The housing industry is continuously trying to make houses tighter.  This will continue coming up as an issue for the sprinkler industry until it is resolved.  The type of sprinkler head we are referring to is the ever popular concealed pendent models...
We have tested houses with and without fire sprinkler systems and the houses with sprinklers always test worse.  The fit of the sheetrock should be greatly improved, or better yet sealed?
Before we all go off & start spouting about the air needing to flow through for the heads to activate - understand that we know that.
It is not the concealed cover, nor the holes in the housing that we want to seal. It is the head housing cover, and we just want to seal the bottom edge... Not the openings in the top.  If the sheetrock is cut perfectly then it is tight against the housing cover, and nobody complains or sees that as a problem.  But the sheetrock rarely fits that well. That is why we'd like to be able to seal around the bottom edge of the housing cover...
It seems that if the heated air were directed through the unit then it would activate more timely/accurately and be more effective.  If the air is passing around the outside of the unit, through the sheetrock to housing gap then it'll take longer to activate the unit?  Sealing the edge of the housing seems to make the most sense for every body.

Views: 1659

Reply to This

Replies to This Discussion

Hi Kent, educate me?

Since air doesn't always move up through the ceiling plane, stack can be zero or reverse, what is the sprinkler relying on to trigger a response?


The 2 flush cover pendant style on the right side of this picture are the units we are struggling with and most often found in residential applications...

The trigger would be the heated air these units are relying on... the airway openings allow the temperature to change quickly enough to release the pendant cover and activate the sprinkler heads.  Thus some air passage is necessary on these "hidden" sprinkler heads.  The pendant covers also have a temperature release mechanism which would separate the cover from the head unit.  Basically they are reliant on stack effect and temperature.

The other heads  on left side of picture generally (some still need air flow) rely mainly on temperature - they are fully exposed, and the typical home owner does not like the looks of them.

So actually the temperature difference they need to move the air, call it convection or stack, is from the fire.  That makes sense and would easily override the lesser temperature differences of house stack effect.

I have had some dealings with my local and state fire marshal and found the line of communications very open and beneficial.  After all, they are the final word and they would certainly be aware of the problem.

Thanks for the reply.


There are two easy solutions - move the air barrier location or placement of the head & line as shown in this piece...

Very nice Sean!  Thanks!


Sealing around the bottom edge of the edge of the cover plate violates the (UL & FM) listing of the product, and it specifically violates NFPA 13, NFPA 13R, NFPA 13D, NFPA 25 and the soon to be out 2015 IECC. The sprinkler standards (NFPA) do not permit paint or caulk on sprinklers and their escutcheons or cover plates. The problem with sealing the bottom edge is that it will delay the activation of the sprinkler. Residential sprinklers must activate quick, before the room temperature becomes untenable to the occupants. By caulking the bottom edge, the air cannot enter and melt the solder connection of the cover plate to the cup and allow the cover plate to fall off, exposing the sprinkler deflector and bulb. Caulk may not only retard the activation times, but it may deflect the spray when the sprinkler is activated.  

We understand that, and it makes perfect sense. That is not the issue.   We are not talking about sealing the cover plate.  It's the housing where it meets the sheetrock - not the escutcheon or the cover plate.  On a rare occasion the sheetrock installers can make it a tight fit and everyone is ok with that - nobody complains. The issue is when the sheetrock installers do not get a tight fit (most of the time) - on a tight house, it can greatly increase the air loss to the house especially when there is 30-40 heads in the house.

We completely understand that the unit needs the airflow around the cover and thru the interior of the unit. The cover plate would still have the intended gap, the openings for air flow in the unit itself would not be sealed - just the perimeter of the housing where it meets the sheetrock...

I understand now. You are speaking of the annular space between the cup (housing) and the sheetrock. In the perfect world, there is tight fit but we both know how that works 99.9% of the time. Can this area be filled with caulk or compound? I would still have to say no, because in the strict sense of the listing, this cup is part of the listed assembly and the sprinkler standards prohibit this as explained above. It may, I stress may, be permitted by the manufacturer to insert a foam backer rod in this annular space to seal this space. The foam backer rod would not have the physical attachment to the cup as paint, caulk, compound would have, and there would be little chance of the backer rod interfering with the operation of the cover plate and sprinkler.  

I am in Sea/Tac area (Fife) all next week teaching. If there is an opportunity to discuss this further or to see some air testing I'm game.  

This is not the only problem with sprinklers.  Any pipe in the attic with water in it must be protected from freezing, and the standard practice in the mid-Atlantic has come to be called "tenting".  The insulator will cover the pipe with a 24" wide R-30 batt draped evenly over the pipe, then blown material is installed over the rest of the ceiling and up onto this batt.

On a cold day, these pipes can be seen with IR from inside the building, indicating a confused thermal envelope exacerbated by the air leak at the head.

We have solved this problem in retrofits by raking back the blown material, removing the "tent", bending a piece of 1/4" styrofoam fan folded material over the pipe, and sealing at the drywall with single part foam.  Insulation is then installed over the completed assembly.  Done properly with extra attention at the heads, you can eliminate the majority of the air leakage.  This is very expensive and I don't advocate doing it in all cases.

The only real solution to the 2 problems - the air space and the air leakage - is to have the entire system installed inside the house with wall heads.  Nothing allowed in the attic.  The installer never makes the argument that the warm air can't get to the head if it is on the wall.  We have yet to find an installer who will do this without kicking and screaming.


Forum Discussions

Speed Tips For Duct Airtightness Testing?

Started by Brendan Reid in General Forum. Last reply by David Butler 3 hours ago. 1 Reply

What made this chimney fall down?

Started by Eric Kjelshus in General Forum. Last reply by Eric Kjelshus on Tuesday. 7 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by Dave Taylor Nov 11. 61 Replies

Manual J (SD) for custom, luxury homes

Started by Dav Camras in HVAC. Last reply by Dav Camras Nov 10. 3 Replies

Quantitative methods for residential zoning

Started by Brett in HVAC. Last reply by David Butler Nov 9. 1 Reply

Latest Activity

Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don. We have never considered screws as impeding airflow, but I can see how in some ducts (e.g.…"
42 minutes ago
David Butler joined Chris Laumer-Giddens's group

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
2 hours ago
David Butler joined James White's group

Building Simulations

Work collaboratively to find easier, more accurate and better ways to model, predict and verify a…See More
2 hours ago
David Butler joined Mark Richardson's group

Renewable Energy

This group will focus on the issues associated with incorporating renewable energy sources like…See More
2 hours ago
David Butler joined Kyle Brown's group

Wrightsoft - Manual J / Manual D

If you use Wrightsoft to calculate loads or design ducts, you likely have questions.  Get answers…See More
2 hours ago
Profile IconDavid Butler and Don Fugler joined Allison A. Bailes III's group


HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
2 hours ago
David Butler replied to Brendan Reid's discussion Speed Tips For Duct Airtightness Testing?
"The Home Performance Forum archives include a number of discussions on various methods for sealing…"
3 hours ago
Brendan Reid posted a discussion

Speed Tips For Duct Airtightness Testing?

Anyone like to share their favorite ways to speed up duct airtightness ("Ductblaster") tests?I'm…See More
5 hours ago


  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service