I'm asked to estimate the heating energy savings from air sealing a 10,000 sf house built in 1900. The former mansion has 6 undampered chimneys and about 40 windows needing repair as well as doors, some needing replacement and all needing weatherstripping. The house has a semi heated basement, and three stories on top of it.

The house has new radiators in all rooms and a 92% efficient boiler.

How do I estimate the potential heating savings from all the air sealing possible here?

George Matthews

 

Views: 347

Reply to This

Replies to This Discussion

"A Journey of a Thousand Miles starts with a single step."

Try breaking the house into smaller pieces and working on the "knowns" first.

The most accurate way would be to have a blower door test conducted.  Once you know how much infiltration you have you should be able to determine the total energy waste associated with that air infiltration.

The Retrotec blower door manual has this chart for estimating the energy wasted due to air leakage. This should help you.

David,

Thanks! That is exactly the information I needed to make sense of the blower door data.

Now I need to learn how to estimate the potential energy savings from changing out a 23 y.o. boiler that was 80% efficient when new. The replacement would be a 95% boiler potentially coupled with solar hot water. There are 25 people here who take showers daily.

 

Also, I've read about heat exchangers to recapture waste heat from the pipes running from showers. "EcoDrain" is one such unit. Does anyone have experience with these? And if so what type of efficiencies are they finding?

George,

If you know the annual fuel heating energy bill you can make an estimate. If you know the cost per therm of natural gas or per gallon of fuel oil you can estimate the total amount of energy required.  For example, for a 80% efficient propane unit and if we assume 340 gallons of propane for heating...
340 * 91,300 * 0.8 = 24.8 MMBTU produced.  We then divide this by 0.95 and 91300 for the new boiler to get 286 gallons required for the new furnace. (91300 is the # of BTU's in 1 gal of propane).  I hope you see my logic...  Or just divide .8 by .95 to get the ratio of new energy required (84%), 16% less energy.

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 23 hours ago. 15 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah yesterday. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

tedkidd replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"Yeah. Gas water…"
16 hours ago
Eric Kjelshus replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"With super cheap natural gas prices now, still worth going all electric?  Tankless needs a lot…"
17 hours ago
Stuart Langley liked Chris Clay's photo
22 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Stuart, I wasn't considering the copula windows... yes, those would indeed need to be…"
23 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"Well, @David Butler, you have seen the property more accurately than I have, but my impression of…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
yesterday
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
yesterday
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service