I've noticed my new furnace uses about the same electrical power to operate as my old furnace, even though the new furnace (44k) is 1/2 the BTU of he old one (88k). Both furnaces use 1/3HP 5amp blower motors, old furnace was on high speed, new furnace was on low. New furnace uses a 1.8amp shaded pole inducer motor and is considerably larger than my previous furnace inducer. I didn't get the amp rating on the old furnace inducer, but it was a standard 'c frame' motor, most are about 1amp. Condensing furnaces do tend to use much larger inducer motors overall.

I write this post because I've noticed the increased electrical consumption with lower temperatures. Electrical efficiency isn't mentioned in furnace specs, but it appears to contribute considerably to operation costs.

Views: 114

Attachments:

Reply to This

Replies to This Discussion

Have you looked into any of the ECM motors? I hear they consume less electricity. It would probably take a couple years to pay for itself in savings, but with a new furnace, it may be worth looking into.

http://www.youtube.com/watch?v=YjoY6hRSudk

This motor looks like a good bet.

ECM could be the way to go. At $250 it does have a long payback though. The use of a 1.8A Shaded Pole inducer motor seems wasteful, a PSC would use 1/2 the power to do the same job.

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 20 hours ago. 15 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah 23 hours ago. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

tedkidd replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"Yeah. Gas water…"
12 hours ago
Eric Kjelshus replied to Bob Blanchette's discussion Tankless Water Heaters... has their time finally come?
"With super cheap natural gas prices now, still worth going all electric?  Tankless needs a lot…"
14 hours ago
Stuart Langley liked Chris Clay's photo
18 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Stuart, I wasn't considering the copula windows... yes, those would indeed need to be…"
20 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"Well, @David Butler, you have seen the property more accurately than I have, but my impression of…"
20 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"@ Stuart,I don't think there's any concern about impact of 4" build-up on elevation…"
21 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"So this building has a few issues with air leaks and air leaks have so much to do with discomfort…"
22 hours ago
Stuart Langley replied to David Butler's discussion How would you insulate this roof?
"John Hatfield has the right idea here for a new roof deck. Polyiso boards always need a good stout…"
22 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service