When using the Duct Blaster I have found it necessary to seal the combustion air grilles on the furnace door and flue on an 80% afue gas furnace in order to obtain accurate leakage results. Any comments?

Views: 211

Reply to This

Replies to This Discussion

Far from my expertise, but there should be no connection between the combustion side and the conditioned air side.  The only thing I can think of would be duct side leakage inside the cabinet then accessing the combustion side through the air intake.  Of course there is a possibility of a cracked air exchanger, but not something you would run into on every unit, I would hope.  I'll be watching to see what the pros have to say.

Bud

Damien, if you do that, your results are inaccurate and of course the HVAC guy has an issue to find & fix

The duct test doesn't test just the ducts, but the whole air handling apparatus. The only exception is the version where the air handler hasn't been installed & then they are only allowed 4% leakage per the 2009 codes. With that said many municipalities don't accept that test & we simply won't perform it

RSS

Forum Discussions

Home Energy Pros and #MeToo

Started by Mike Rogers in General Forum 3 hours ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 18 hours ago. 34 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Latest Activity

Profile IconBrian Cizmar, Charles Allen, Charles Buell and 1 more joined Home Energy Pros Forum
17 minutes ago
Mike Rogers posted a discussion

Home Energy Pros and #MeToo

If it doesn't seem obvious why a discussion of …See More
3 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
18 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
22 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
22 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
23 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
23 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"It kind of depends on the PIC. Not all insulation is made the same. Here in VT (and all of New…"
23 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service