We have just completed a translation of our Duct Testing Quick guide in Spanish. 

 

More translation are on their way.  You can find the attachment below.

 

Has anyone seen any other Blower door or duct testing translations out there ?

 

QG150-DucTester%20Q32%20%28Spanish%29.pdf

Tags: Duct, testing

Views: 267

Attachments:

Reply to This

Replies to This Discussion

Great reference! Thanks for sharing. There is also an english/ spanish guide to duct sealing available at http://www.systemvision.org/
Thanks!

I have reviewed your translation of the Duct Testing Quick guide in Spanish. I am doing this as part of a large translation project for a client in your industry. My apologies for being blunt, but the translation is peppered with wrong terms, clunky phrases and incomplete grammar. A rewrite is recommended.

On the other hand, publishing a translation for an industry that lacks sufficient training materials in Spanish is a big, positive step. All translation is perfectible. Please consider having a professional technical translator have a go at your document to improve it. 

Thank you.

Hi Mario,

 

I appreciate your feedback, and your point is duly noted. We have been working with a few Universities in Chile, who have Energy Efficiency programs and it seems there are some terms that more difficult to translate.  As we do not sell any of these materials and make them available for free for testers, our budget is limited.  If you have suggestions on how to improve it, or know of someone who would be able to help us please let me know.

Thanks,

 

Silvie

Dear Silvie,

It's not so much the terminology but the writing that is awkward. Perhaps you could use a good writer (a native Spanish speaker, educated in a Latin American college) to edit the writing and make it more natural. Terminology is always secondary to good writing.

On my part, I can offer assistance with more standard terminology. Perhaps we can join forces.

 

Regards,

 

Mario

Mario,

I fear that perhaps what we had asked to be translated is awkward, which may have hindered it's ability to be translated properly. We enlisted one of our new empoyees who is from Mexico, University educated, so I wonder what we are missing.

We do want to produce more of our help guides in Spanish, so I would love to get your input on how we can improve.

My email is silvie@retrotec.com, (604) 732-0142

Send me a quick email with your contact details and we can discuss further.  Thanks again for your comments.

 

Silvie

RSS

Forum Discussions

Psychrometric Chart Training

Started by John Krochmalny in Training 7 hours ago. 0 Replies

Too many Heat Pump Water Heaters in a basement?

Started by Brad Cook in General Forum. Last reply by Michael Duclos 12 hours ago. 10 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler on Monday. 2 Replies

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

B Eric Bell liked Bob Krell's group Healthy Indoors (IAQ)
4 hours ago
John Krochmalny posted a discussion

Psychrometric Chart Training

Looking through the various areas of this site, I didn't see too much information or training on…See More
7 hours ago
Profile IconMike Malek, Avery T. Phillips and Sarah Burger joined Home Energy Pros Forum
8 hours ago
Dannie Jackson's blog post was featured

Core Heat And Other Concepts

  In some places the use of solar heated liquids from hot water solar panels are used to provide…See More
12 hours ago
Michael Duclos replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"I’ve been looking into Sanden for a multi-family PH near Laconia, NH, ASHRAE 99.6% temp is…"
12 hours ago
Profile IconTroy Spindler, Mike Berg, Andrew McDowell and 4 more joined Home Energy Pros Forum
yesterday
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
Monday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Interesting idea. Commercial roof on a slope! Typical density for roofing spray foam is 2.5 to 3.0…"
Monday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service