I had a call from a customer asking me if we sealed ducts.  He was watching This Old House on TV and the contractors were using equipment that sealed the ducts from the inside.  They stated that this procedure kept duct leakage to 5% or less.  Has anyone ever heard of, seen, or used this procedure. Just curious, I'll stick to mastic, but I always like to keep up with the latest.

 

Thanks

Tags: Duct, HVAC, Sealing

Views: 14030

Reply to This

Replies to This Discussion

He's probably talking about Aeroseal http://www.aeroseal.com/

I have no experience with it. One of my customers is definitely a candidate for this.

I would find out what was being sprayed on the inside of the ducts...
The air being blown through the house goes through those ducts...
The homeowner will get to breathe the sprayed on sealant for quite a while.. You want to make sure it's not harmful.
Ira Eisenstein
Keep in mind they were using this on "This Old House" so they probably aren't going to use something dangerous or toxic or harmful to the system. Never heard of anyone using it here in the south.
You also want to make sure there are no motorized duct dampers (for zoning)...
You don't want to "seal" them into one position.
Ira Eisenstein

Pros:

  • Seal ducts that are inaccessible
  • Seal joist spaces that are used as duct runs to hopefully improve air quality

Cons:

  • Forget about having the ducts cleaned after they are sealed from the inside.
This product typically can only seal small holes 1/4 inch or less. For the overall cost, your better off buying a bucket of mastic and mesh tape and doing it the old fashioned way. This might be an option for brand new systems but many older ones will have larger holes that this cannot fix.
Thanks for the info.  It may be useful in situations were all the ducts are run through bulk heads in the basement.

 

 

 

 

 

 

 

 

 

 

 

 

We just completed an Energy Upgrade on a home that had the FAU replaced with a 90% sealed combustion unit. The HVAC Contractor who sold our client the FAU the year before, told them their ducts were fine, and he'd just seal them.  We tested the duct leakage at 25%, and the photos reflect the condition of the ducts.  For clients that ask for a sealing option, make sure they know the true condition of their ducts. 

If the product is effective I would think many would benefit from its use- What's the point

of renting conditioned air.Question, can the application process show before and after pix?

Confirmation of the products proper application would be of interest,                                                                   - not just to me but for any customer.

Invented here at LBNL.

More info at this link: http://epb.lbl.gov/aerosol/

RSS

Forum Discussions

Psychrometric Chart Training

Started by John Krochmalny in Training 3 hours ago. 0 Replies

Too many Heat Pump Water Heaters in a basement?

Started by Brad Cook in General Forum. Last reply by Michael Duclos 8 hours ago. 10 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler on Monday. 2 Replies

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

B Eric Bell liked Bob Krell's group Healthy Indoors (IAQ)
30 minutes ago
John Krochmalny posted a discussion

Psychrometric Chart Training

Looking through the various areas of this site, I didn't see too much information or training on…See More
3 hours ago
Profile IconMike Malek, Avery T. Phillips and Sarah Burger joined Home Energy Pros Forum
4 hours ago
Dannie Jackson's blog post was featured

Core Heat And Other Concepts

  In some places the use of solar heated liquids from hot water solar panels are used to provide…See More
8 hours ago
Michael Duclos replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"I’ve been looking into Sanden for a multi-family PH near Laconia, NH, ASHRAE 99.6% temp is…"
8 hours ago
Profile IconTroy Spindler, Mike Berg, Andrew McDowell and 4 more joined Home Energy Pros Forum
yesterday
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
Monday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Interesting idea. Commercial roof on a slope! Typical density for roofing spray foam is 2.5 to 3.0…"
Monday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service