Hello HEPsters,

As we ramp up our business, we are looking for a low-cost CRM we can use to track our interactions and collect some metrics about our business.

Have you had any experience with any inexpensive, online tools? Any recommendations?

Thanks,

Tom

 

Views: 169

Reply to This

Replies to This Discussion

Tom, this topic has been discussed a number of times at the JLC Online "Business Technology" forum. Joe Stoddard is the moderator and he does a great job finding and reviewing new software, including CRM. If you page through the threads you will find several applicable.

 

http://forums.jlconline.com/forums/forumdisplay.php?f=3

If you are interested in a more robust, Quickbooks-integrated solution that handles more than just CRM-- it handles everything from the CRM initial client contact, to estimating, quotes, po's, invoices, vendor bills, even warranty tracking -- then check out ImproveBuild RBS (remodeler's business solution) at www.improvebuild.com.  But before I take more time writing about a product that may be beyond your needs, let me  know if you want me to tell you more.  I'm in my 3rd year as a customer/user of RBS.

RSS

Latest Activity

Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
4 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
5 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
5 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
5 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
9 hours ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
10 hours ago
Profile IconBrendan Reid and David Butler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
10 hours ago
Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
18 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service