I'm looking for some foam installation prices. I know each company is different and have there own overhead and all, and I also realize there are differing degrees of difficulty but there has to be some sought of avg. price for sq. ft. pricing per inch for attic slopes, crawlspace/ basement ceilings and rim joist.

Any suggestions?

Thanks

Views: 302

Reply to This

Replies to This Discussion

In Oklahoma contractors are charging about 3x the cost of standard insulation.

Not much to go on, but, thanks any whey.

The National Renewable Energy Laboratory has a database of energy efficient retrofit measures with average costs and ranges including material and labor costs. The database is available at

http://www.nrel.gov/ap/retrofits

We are currently nearing the release of v3 of the database, but hopefully you can find what you're looking for in the current version. Good luck.

Great, thank you.

Paul

RSS

Forum Discussions

Psychrometric Chart Training

Started by John Krochmalny in Training 15 hours ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler on Monday. 2 Replies

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"Hi Mike, it's good to get some feedback from the field, and thanks for confirming Gen 3 is now…"
4 hours ago
B Eric Bell liked Bob Krell's group Healthy Indoors (IAQ)
12 hours ago
John Krochmalny posted a discussion

Psychrometric Chart Training

Looking through the various areas of this site, I didn't see too much information or training on…See More
15 hours ago
Profile IconMike Malek, Avery T. Phillips and Sarah Burger joined Home Energy Pros Forum
16 hours ago
Dannie Jackson's blog post was featured

Core Heat And Other Concepts

  In some places the use of solar heated liquids from hot water solar panels are used to provide…See More
21 hours ago
Michael Duclos replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"I’ve been looking into Sanden for a multi-family PH near Laconia, NH, ASHRAE 99.6% temp is…"
21 hours ago
Profile IconTroy Spindler, Mike Berg, Andrew McDowell and 4 more joined Home Energy Pros Forum
yesterday
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
Monday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service