Convert BTU/hr in a Manual J to actual fuel usages

I cannot find any conversion table that translates the BTU/hr heat loss in a Manual J report to the amount of fuel required to heat the building to the design temperature.  In this case I'm using propane and I have calculated the 92,000 BTU/gal using the actual BTU/Hr X Degree Days and end up requiring over 30K gallons of propane for a heating system.  This cannot be correct.  Any guidance would be greatly appreciated.

Views: 1842

Reply to This

Replies to This Discussion

Morgan,
From the perspective of the energy auditor, I don’t agree with that statement.
“Actual fuel and electrical usage" is anecdotal at best”
Unless you change something, the best predictor of future energy usage is past energy usage. Now if you are going to use fuel and electrical usage, you have to have a minimum of one years data, you need to know the heating degree days and cooling degree days over that exact period, (Or binned temp data) And you need to measure the combustion efficiency of the heat source.
I will try to dig up a paper I have on the subject- the punch line was that identically built and situated houses had a 2 fold difference in energy usage based on occupant behavior. Both have identical manual J heat loss, but use very different amounts of energy. If you are trying to make rational choices based on payback, you have to know the actual usage- which is related to occupant behavior.
An example- If you are going to recommend a solar pool heater to save money- you better make sure they are actually using their existing electric resistance pool heater. Likewise recommending a high efficiency AC replacement makes no sense if the homeowner hates AC. A customer who keeps his house at 80°F all winter, uses a lot more energy than someone who keeps the thermostat at 55. Some efficiency measures that have a reasonable payback in one situation will not in the other.
The customer generally does not care about manual J- design temps, etc. They want to know what it is going to cost to heat and cool their house, and what is the best way to do it. Manual J is one tool in the box to help do this.
Cheers,
Eric

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by Kevin Miller 21 minutes ago. 4 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training 23 hours ago. 0 Replies

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

Kevin Miller replied to David Butler's discussion How would you insulate this roof?
"I'd recommend a reflective roof.   Depending on their expected usage of this…"
21 minutes ago
Crista replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"You might find this study of…"
1 hour ago
Profile IconCrista, David Potter, Walter Neboshynsky and 3 more joined Home Energy Pros Forum
1 hour ago
Lindsay Bachman's event was featured
Thumbnail

2017 HPC California Regional Home Performance Conference & Trade Show at Hilton Long Beach

November 14, 2017 at 7am to November 15, 2017 at 3pm
We are excited to join together with industry leaders along with fellow weatherization…See More
2 hours ago
Joe Hughes's event was featured
Thumbnail

HEALTHY BUILDINGS SUMMIT 2017 Conference at Seven Springs Mountain Resort

November 2, 2017 to November 4, 2017
Join us for another year of outstanding "Research to Practice" presentations with world class…See More
2 hours ago
Michael Duclos's event was featured
Thumbnail

Passive House Massachusetts - Symposium at District Hall, Boston, MA

October 25, 2017 all day
Getting High Performance Buildings DonePassive house standards and strategies have come a long way…See More
2 hours ago
Diane Chojnowski's event was featured
Thumbnail

2017 Home Performance Coalition California Regional Home Performance Conference & Trade Show at Hilton Long Beach

November 14, 2017 to November 15, 2017
We are excited to join together with industry leaders along with fellow weatherization…See More
2 hours ago
John Hatfield replied to David Butler's discussion How would you insulate this roof?
"The solution maybe installation of foam fill panels between the existing raised metal ribs within…"
2 hours ago

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service