I'm getting ready to purchase the following items needed to perform a BPI audit:

1) combustion analyzer
2) gas leak detector
3) carbon monoxide ambient/personal monitor

Does anyone have opinions on the best models/brands to purchase? What company would you recommend purchasing from? I'm looking at www.professionalequipment.com and www.trutechtools.com

Thanks!

Views: 344

Reply to This

Replies to This Discussion

AC Tool and Home Inspector Essentials are also good sources.
I've got the Testo 327 and like it quite a bit. It has the water trap built into the body, which I like better than having it in the hose, it has built-in NOX filtering, and the sensors are field-replaceable. I have also used and like the Bacharach Fyrite Insight. For BPI audits you could get away with a lower priced instrument. You can get some pretty good deals on eBay if you keep an eye out. I've got the Testo 316 gas sniffer and 317 CO monitor--both are nice and small. Honestly, all the major brands of these types of tools are fine.

I've had good response working with professionalequipment.  I've bought a few things thru trutech and they are fine, also.  My personal experience has been slightly better at proequip.  YMMV. 

I ended up buying the BW Gas Alert for my personal CO.  Seems to work fine and the battery lasts a looong time.  I bought the Bacharach Leakator Jr for combustibles; it is *extremely* sensitive, which is both good and bad. I would have liked a few features (the Jr. has no adjustments) but was broke at the time I bought it.  Then last year, when the new Bacharach Insight came out, I got one to replace an aging Testo and I love it.  Really an excellent tool.

Good luck,

David

Advanced Home Performance

Hey David,  on your Leakator Jr. you know about the "lower sensitivity" mode right?  The instructions are on the back and it takes a bit of practice, but I find it very useful.  It's my favorite model of combustible gas detector and I've tried a few different brands.

 

I use a Testo 330-LL, teach with a Testo 325 and wear a Testo 317-3. They are dependable and tough.  And I'm close to Sparta, NJ if there's a problem.  I also recommend the Testo 510 manometer for portability, but make sure you read the manual and follow the instructions or you will think it's possessed.

Now that I am working for CSG and they supply my equipment I have a combustion analyzer and gas leak detector for sale if you are interested.  They have not been used much and are only a year old.  Send me a message if you are interested.

Do you still have them for sale? replay back at  sdciassist@gmail.com  thanks.
Trutech for sure.    Ask Bill Spohn there for his recommendation.  He knows his stuff and will answer questions for you as you begin to use your gear.

RSS

Forum Discussions

Speed Tips For Duct Airtightness Testing?

Started by Brendan Reid in General Forum. Last reply by David Butler 3 hours ago. 1 Reply

What made this chimney fall down?

Started by Eric Kjelshus in General Forum. Last reply by Eric Kjelshus on Tuesday. 7 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by Dave Taylor Nov 11. 61 Replies

Manual J (SD) for custom, luxury homes

Started by Dav Camras in HVAC. Last reply by Dav Camras Nov 10. 3 Replies

Quantitative methods for residential zoning

Started by Brett in HVAC. Last reply by David Butler Nov 9. 1 Reply

Latest Activity

Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don. We have never considered screws as impeding airflow, but I can see how in some ducts (e.g.…"
8 minutes ago
David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
1 hour ago
David Butler joined James White's group
Thumbnail

Building Simulations

Work collaboratively to find easier, more accurate and better ways to model, predict and verify a…See More
1 hour ago
David Butler joined Mark Richardson's group
Thumbnail

Renewable Energy

This group will focus on the issues associated with incorporating renewable energy sources like…See More
1 hour ago
David Butler joined Kyle Brown's group
Thumbnail

Wrightsoft - Manual J / Manual D

If you use Wrightsoft to calculate loads or design ducts, you likely have questions.  Get answers…See More
1 hour ago
Profile IconDavid Butler and Don Fugler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
2 hours ago
David Butler replied to Brendan Reid's discussion Speed Tips For Duct Airtightness Testing?
"The Home Performance Forum archives include a number of discussions on various methods for sealing…"
3 hours ago
Brendan Reid posted a discussion

Speed Tips For Duct Airtightness Testing?

Anyone like to share their favorite ways to speed up duct airtightness ("Ductblaster") tests?I'm…See More
4 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service