# Calculating heat loss

Could anyone help me calculate a breakdown that shows  heat loss in BTU/hour that adds up to 100% and shows % or subtotals for the sub-categories that add up to 100% based on  u values and Area for the sub-categories I guess per square foot of area in question. For a stated day with stated temperature inside of 70 degrees and outside temperature of 40.
The areas in questions are:

-Ceiling. with an R4 value of insulation
-1st Floor to unconditioned basement 2x8 empty cavity, 3/4 pine groove plus 1/2 hardwood -No insulation
-Windows/Glass casement windows double pan glass
-Exterior Walls with 3/4 pine siding, 3/4 insulation, 1/2 drywall
-Air change
I would be grateful for any advice you guys could provide!
Thanks

Views: 294

### Replies to This Discussion

Answer equals = U * A * T

As you are missing A or area.... for the first one

What the Delta T & A is for the second

What the U value & A are for the third & fourth...

I was thinking that in order to stay away from a full blown home calculation, I would keep it simple so I could learn the concepts. I suggested a one square foot of the material, temperatures ranges are 40 outside to 70 inside.

Knowing the area (one square foot) and knowing the temperature range... Can I figure the rest?

Thanks

Hi Luis,

It gets a lot more complicated than what you are asking for, but learning is something a lot of people should be doing.

Your one ft² example will give you an idea as to the heat loss per foot in one hour, but only for the given temperature.  If you want the loss per year, you add in the heating degree days.

Sean's equation Q = U x A x ▲T gives you the btu's for the area and the u-value specified.

If you want to estimate the energy lost for a year, use: Q = U x A x HDD x 24.

If you want to play with a very basic heat loss calculator, try Gary's over at build it solar:

http://www.builditsolar.com/References/Calculators/HeatLoss/HeatLos...

Bud

## Forum Discussions

### Weatherization Pros: Get BPI Certification Exam Costs Covered!

Started by Quinn Korzeniecki in General Forum on Tuesday.

### Beginners Guide: Managing Subscriptions on Home Energy Pros

Started by David Butler in General Forum. Last reply by Diane Chojnowski on Tuesday.

### Welcome Home Performance Forum Members! (formerly RESNET BPI - Energy Audit and Home Performance)

Started by David Butler in General Forum on Saturday.

### Speed Tips For Duct Airtightness Testing?

Started by Brendan Reid in General Forum. Last reply by David Butler on Saturday.

### What made this chimney fall down?

Started by Eric Kjelshus in General Forum. Last reply by Eric Kjelshus Nov 13.

74 members

131 members

27 members

332 members

149 members

## Latest Activity

18 hours ago
Dannie Jackson added a discussion to the group Energy Efficient Design

### Affordable Energy Efficient Design

18 hours ago
19 hours ago
"Design wise I would say that energy efficiency is defined by the Btu / square foot.  This is…"
19 hours ago
Dannie Jackson joined Chris Laumer-Giddens's group

### Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
19 hours ago
19 hours ago
Dannie Jackson posted a blog post

20 hours ago
21 hours ago