Does anyone have any input on what would be the best weatherization blow machine out there? I would like to have a machine that is primarily used for Retro fit walls and attic, but can also blow fiberglass. I have had PTO diven machines, independant motor machines, but never an electric. I would be interested in hearing feedback.

Views: 408

Replies to This Discussion

I primarily use the Krendl machines. The Krendl 500 works well for both dense pack and open blow. It also handles cellulose and fiberglass. I like the dual blower and the machine is fairly light so two man can move it. For larger high volume jobs you may want to spec out a Krendl 2000 or one of their larger machines. Go to J&R products (www.jrproductsinc.com) or www. krendlmachine.com for the specs.

Accu 1 makes pretty good machines, 9300 and 9400 can blow cell or fiberglass. Biggest problem that I've had with them is getting voltage drop through cords. Eliminated it by setting up a breaker box inside the truck and running a 10 guage cord to the home with adapters for dryer plug or to the panel.

RSS

Discussion Forum

The Truth About Windows?

Started by Joel Greenberg. Last reply by Carl Johnson Aug 30, 2016. 20 Replies

BPI Training

Started by Andrew Vidal. Last reply by Ed Minch Jul 6, 2013. 3 Replies

WAP In DC

Started by Bret Monroe. Last reply by Pat Dundon Jul 5, 2013. 3 Replies

Blow machines

Started by Jeff Stuart. Last reply by Robert D York Jr Feb 24, 2013. 2 Replies

Latest Activity

Diane Chojnowski replied to Mike Rogers's discussion Home Energy Pros and #MeToo
"Mike, thanks so much for supporting women and the #MeToo campaign. Women everywhere  have…"
59 minutes ago
Profile IconBrian Cizmar, Charles Allen, Charles Buell and 1 more joined Home Energy Pros Forum
1 hour ago
Mike Rogers posted a discussion

Home Energy Pros and #MeToo

If it doesn't seem obvious why a discussion of …See More
4 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
19 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
23 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
23 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service