Basic CAZ instructions may not provide the correct number.

When you measure the worst case depressurization of a CAZ are you measuring the pressure in the appliance room or the room above it?  When your appliance room is in the basement and you run your reference tube upstairs and out the front door, your reading is actually for the room above at the same elevation as the point where your reference tube exits the envelope.  On a cold day, that can change your reading by a couple of Pascals.  And that can be the difference between passing and failing for some appliances.

We all know that the stack effect pressures vary from ceiling to the basement floor and they change with every foot of elevation.  So, how do we measure the pressure in a basement surrounded by dirt and no way to place our reference tube out through a concrete wall?  We calculate the change per foot for the given temperature difference and adjust our reading to the elevation we need.

Anyone doing this?  Anyone  interested?

Bud

Tags: CAZ, reference, tube

Views: 106

Reply to This

Latest Activity

Jonathan Beers posted a discussion

MGE hiring for my job

I'm retiring next spring, and MGE is hiring:…See More
16 hours ago
Summer Reyes's blog post was featured

Equipment We Use: Detecting Water With Infrared Cameras

You know water is somewhere on the property, you can smell the mildew, but can't determine the…See More
17 hours ago
Profile IconGlenn Hourahan and Joseph Frasier joined Home Energy Pros Forum
17 hours ago
Alfredo Baccari added a discussion to the group Job Board
Thumbnail

HERS or/and BPI Energy Inspector in SF Bay Area (SAN JOSE, CA).

ELEM3NTS is a leading energy efficient consulting company specializing in residential homes. We…See More
18 hours ago
Alfredo Baccari joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
19 hours ago
David Byrnes's blog post was featured

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
22 hours ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
yesterday
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service