Assessing the true end user price of installing a new boiler?

Hi there, I often get quizzed over the true cost to the user of installing a new boiler.  It seems to me consumers do not understand the costs around buying and installing a new boiler. You have companies who sell boilers and companies that sell and install boilers.  You have local boiler installers as well national companies.  You now even have websites such as http://www.boilersprices.co.uk/ideal-boilers-prices/vogue-combi/ trying to make sense of pricing within the sector! Can someone advise how pricing within the sector is regulated?   It seems consumers have a trust issue with regards to engineers and pricing.

Tags: boiler, pricing, regulations

Views: 194

Attachments:

Reply to This

Replies to This Discussion

From my understanding there regulated through the free market process. Just remember, you get what you pay for.

If your question is the cost of the new Boiler + installation + the cost of the fuel it will burn, In X building , in Y given geographic location, with Z insulation level,  compared with a different efficiency boiler over XX years at YY interest rate.

Then that is a very complex calculation that will change with each of the listed variables and dozens not listed.

The US government   has released a computer program to do the calculation learning the program, entering the data, and interpreting the output will require about 30 hours of your time.  

https://beopt.nrel.gov/

 

It is best for consumers to get several bids for similar equipment. Discard any bids more than %15 above or below the average as they are very likely flawed and then pick the remaining vendor you liked best.

 

WaltA

When it comes to a topic as complex as a heating system, it is foolish to rely solely on bid prices to make a choice. Unfortunately for the consumer, the majority of contractors are very brief in their description of what they will provide for their bid. You have to look at the specifications, such as -brand and model- is it a reliable one? are parts readily available? Will the installer also maintain the system? Is he/she factory trained on that brand/model?

-Is the model chosen the best choice and most efficient for the application? (look at the yellow EPA efficiency label)

-will it include new ECM circulators?

-Is everything needed included? such as electrical or control wiring, permits, if a condensing boiler is a pH neutralizer included?

-will they check feed water chemistry and add treatment as needed? (many contractors are not paying attention to boiler water chemistry, which may not cause problems now, but can clog everything up in roughly 3-10 years)

-will the boiler or furnace be properly commissioned, as described in most IOMs?

Also keep in mind that the more complex the boiler (such as condensing and modulating boilers/furnaces), the more important it is for annual service, and the more the service and repairs will cost.

RSS

Latest Activity

Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
14 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
15 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
15 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
15 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
19 hours ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
19 hours ago
Profile IconBrendan Reid and David Butler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
19 hours ago
Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service