I wanted to know if anyone had any experiences using the bubble wrap w/ the double sided radiant barrier.

I had a weird experience thanks to a fire pit, my Brother-in-Law, and a few beers.  My Brother-in-Law made a make shift pot holder looking glove and held it about 8" away from a pile of extremely hot embers.  After nearly a minute the glove started to smoke because the exterior nearest the fire was starting to melt.  Despite this, he said the inside never got that hot.

What I am figuring is that, if this material works this well with such extreme temperatures, why wouldn't it be useful in a knee wall area?  It would be a lot easier to install than rigid foam board and much easier to squeeze through a small access hole.

 

What do you guys think?  Do you have experience using this material? (Keep in mind I live in Atlanta, GA, not New England).  Thanks!

Tags: Insulation, bubble, heat, knee, transfer, walls, wrap

Views: 1115

Reply to This

Replies to This Discussion

Remember, a radiant barrier only reflects radiant heat.  The fire test your brother in law did was the ideal test for that material, since essentially all the heat was radiant, but in an attic situation that's not the case.  For the radiant barrier to work, there has to be an air space between the barrier and any other objects (to rule out conduction), and its surface has to remain clean and shiny (no dust collection).  So would it help in a kneewall area?  Maybe a little, but not as a replacement for insulation.
I get your point, but I am talking about using it in addition to the existing insulation.  The most common treatment here for knee wall problems is to seal the penetrations from the attic side of the wall, push the batts (usually R-13 here) back into place and then attach Thermax sheathing with a radiant barrier to the studs over the batts and seal the seams. Sometimes the construction, access, and penetrations make using a rigid foam board product very difficult to use. The bubble wrap radiant barrier seems to be a good alternative.

Installed in that location -- over the fiberglass batts -- I would be concerned about condensation on the bottom surface wicking into the fiberglass and creating mold habitat.  I'd also be concerned that dust would accumulate on the top surface and make the radiant properties useless. 

Has this stuff been in use long enough to be able to check in on an installation that's 5 or 10 years old to see how it's holding up?

Jon,

 

  I'm guessing that the foil/bubble wrap will provide a real good air seal if installed properly (like every other air seal material) but will be much more costly than poly wrap and not provide anywhere near the insulation of EPS or XPS board.  I've seen no independent testing of these products to verify their claimed "R" values.  Knee walls are always a pain; almost makes you want to rip out the walls to re-do everything.

You can say that again.
We see Reflectix used behind knee walls all the time.  It is the air barrier to prevent windwashing, and meets code for fiberglass batt covering.

You should put a link to Reflectix in your post. I haven't heard of it.

RSS

Latest Activity

Jonathan Beers posted a discussion

MGE hiring for my job

I'm retiring next spring, and MGE is hiring:…See More
12 hours ago
Summer Reyes's blog post was featured

Equipment We Use: Detecting Water With Infrared Cameras

You know water is somewhere on the property, you can smell the mildew, but can't determine the…See More
13 hours ago
Profile IconGlenn Hourahan and Joseph Frasier joined Home Energy Pros Forum
13 hours ago
Alfredo Baccari added a discussion to the group Job Board
Thumbnail

HERS or/and BPI Energy Inspector in SF Bay Area (SAN JOSE, CA).

ELEM3NTS is a leading energy efficient consulting company specializing in residential homes. We…See More
14 hours ago
Alfredo Baccari joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
15 hours ago
David Byrnes's blog post was featured

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
18 hours ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
yesterday
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service