I am wondering if building experts have an opinion in the correct ordering of vapor and air barrier for a small 1 story house in Berkeley CA. We are planning a DER/Passive house retrofit and are figuring out where to locate the vapor and air barrier. One proposal is vapor barrier (let's say a good quality membrane) on the outside, keeps the moisture out and allows the house to dry out to the outside. In this setup, there is a continuous air barrier (lets say OSB with sufficient taping) on the inside, which helps to make the house quite airtight. In the middle would be loads of insulation. What are the issues with this setup? How can it be improved? Does this ordering make sense for Berkeley's climate. 

Thank you.

Views: 116

Reply to This

Replies to This Discussion

Just asking questions and seeing what sticks is a poor way to obtain information. You should begin by reading the book linked below. It is used by many BPI and HERS trainers nationwide. It is a good overall introduction to many fundamental ideas. I would think it beneficial to your quest for information and there are many breadcrumb trails to follow as you read this book

Residential Energy By Dorsi Krigger http://www.srmi.biz/team-saturn/principals/john-krigger

The linked website below is filled with information. A great resource.

Building Science http://www.buildingscience.com/index_html

In your local area there are seminars you can attend. sign up for some building science classes

http://www.pge.com/pec/classes/

While you are in love with the Passive House Concept it is not the only system that exists. Look at these other systems below and understand what they have in common and what makes them different.

EEBA http://www.eeba.org/

Energy Star http://www.energystar.gov/?c=new_homes.hm_index

LEED http://www.usgbc.org/leed

The above is really only a start as most of us continue to follow breadcrumbs. We review what we think we already know, learn new concepts and try to improve our process.

And to answer your question I would say no but will not elaborate.

RSS

Forum Discussions

Too many Heat Pump Water Heaters in a basement?

Started by Brad Cook in General Forum. Last reply by David Butler 33 minutes ago. 11 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training 11 hours ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler on Monday. 2 Replies

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"Hi Mike, it's good to get some feedback from the field, and thanks for confirming Gen 3 is now…"
33 minutes ago
B Eric Bell liked Bob Krell's group Healthy Indoors (IAQ)
8 hours ago
John Krochmalny posted a discussion

Psychrometric Chart Training

Looking through the various areas of this site, I didn't see too much information or training on…See More
11 hours ago
Profile IconMike Malek, Avery T. Phillips and Sarah Burger joined Home Energy Pros Forum
12 hours ago
Dannie Jackson's blog post was featured

Core Heat And Other Concepts

  In some places the use of solar heated liquids from hot water solar panels are used to provide…See More
16 hours ago
Michael Duclos replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"I’ve been looking into Sanden for a multi-family PH near Laconia, NH, ASHRAE 99.6% temp is…"
16 hours ago
Profile IconTroy Spindler, Mike Berg, Andrew McDowell and 4 more joined Home Energy Pros Forum
yesterday
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
Monday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service