does anyone have experience air sealing fire sprinklers?

 

Per California code, all new  homes must have fire sprinklers.... think 30 to 40 holes in the ceiling.

 

Per installer, you can't foam/caulk the sprinkler as this will make it inoperable or void the warranty.

 

Any ideas?

Views: 404

Reply to This

Replies to This Discussion

Yep its called a hot roof assembly

I would check the manufacturers directions / website but you will probably end up using something like tenmat covers over them

Sean,  Thanks for the suggestion, but just to confirm, the manufacturer is hot roof assembly?  please verify.  Thanks.

Sorry, you asked for suggestions & the best one is to go with a hot roof assembly (http://bit.ly/HotRoof)

I would simply ask the installer for the manufacturer & model info if they don't have the specs handy. With that you can generally find a mark / info on the head

Sean,  Thanks for clarifing... I didn't know that "hot roof assembly" referred to conditioned attics.  Unfortunately that won't work with this builder.  The builder is a medium size production builder who is not ready to make that big a leap.

My pleasure & let me just quickly state - being in Cali with the new Title 32 (?) stuff coming out, he might find it cheaper & easier - definitely worth giving it a shot 

Check out this study from DOE: http://www.nrel.gov/docs/fy13osti/56667.pdf

Wes

Great.  How timely is this!  and I'm on a BA team.  Thanks.

Great document - however they give short shrift to my preferred recommendation which is to install wall heads - get ALL the pipes out of the attic.  I don't care how well you do the "tenting", I can still see the path of the pipes with IR on a cold day in zone 4.

Ed Minch

RSS

Forum Discussions

Psychrometric Chart Training

Started by John Krochmalny in Training 13 hours ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler on Monday. 2 Replies

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco on Monday. 1 Reply

Latest Activity

David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"Hi Mike, it's good to get some feedback from the field, and thanks for confirming Gen 3 is now…"
2 hours ago
B Eric Bell liked Bob Krell's group Healthy Indoors (IAQ)
10 hours ago
John Krochmalny posted a discussion

Psychrometric Chart Training

Looking through the various areas of this site, I didn't see too much information or training on…See More
13 hours ago
Profile IconMike Malek, Avery T. Phillips and Sarah Burger joined Home Energy Pros Forum
14 hours ago
Dannie Jackson's blog post was featured

Core Heat And Other Concepts

  In some places the use of solar heated liquids from hot water solar panels are used to provide…See More
18 hours ago
Michael Duclos replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"I’ve been looking into Sanden for a multi-family PH near Laconia, NH, ASHRAE 99.6% temp is…"
18 hours ago
Profile IconTroy Spindler, Mike Berg, Andrew McDowell and 4 more joined Home Energy Pros Forum
yesterday
David Butler replied to Brad Cook's discussion Too many Heat Pump Water Heaters in a basement?
"theoretically, let's say you perfectly isolate the HPWH from a heat source. The HPWH's…"
Monday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service