As much as I would like to say I am an expert, I am not when it comes to the actual performance and settings of a residential gas furnace and air conditioning unit.  So I am hoping some would be willing to share their incite or at least some resources I could go to.

So my question is about the fan speed settings for the heating and cooling system.  Two years ago I had a new Tempstar 95AFUE two stage variable speed furnace installed.  It is my understanding that even though it is a variable speed fan that you want to adjust fan speed differently for the heating and cooling system.  I ask because the service tech was at the house today on an A/C tune up & when my wife inquired about the fan speed, she was told it was on the factory settings.

So is this true, with variable speed motors you don't have to worry about the fan speed, or should there have been some kind of adjustments at time of the original install?  And for future service calls by potentially another company, what kind of testing should I ask for to be done to see if the CFM moving through the system are appropriate for the season.

Thanks in advance!

Josh

Views: 53169

Reply to This

Replies to This Discussion

Sounds like to me that you have a system installed and it has never been setup properly. Have a Service Tech come by and set it up for you.

A quick static pressure test would help you determine if you're getting the flow you need over the coil.   You should be able to reference your manufacturer's documentation for the TESP.   If it's too high, then it would be time to call in for a clean and tune as well as test and balance.   

Just my $0.02.

this is what I do for 25 yr.  I find most res unit are mid .8" water Col.   The tag on side of air mover says .5 or .4

you can look at SP or feet per min or temp, you get the same model.  This is big,  very big

RSS

Latest Activity

Chris Dorsi posted an event
Thumbnail

2018 Habitat X Summer National Conference at Big Sky Montana

June 27, 2016 to June 29, 2016
The 2018 Habitat…See More
6 hours ago
Stuart Langley liked David Byrnes's blog post Strategies for Hiring and Interviewing for Home Performance Professionals
10 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Visual inspection can only confirm the presence of mold, not the absence.   That said,…"
13 hours ago
Armand C Magnelli replied to Don Fugler's discussion joining ducts in the group HVAC
"I often suggest pop-rivets as an alternative to sheet metal screws for both clothes dryer duct work…"
13 hours ago
Kevin Miller replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Sampling would be primarily to verify 'Condition 1' or 'Normal Fungal Ecology'…"
13 hours ago
Daniel Cullen joined Building Performance Institute's group
Thumbnail

Building Performance Institute (BPI)

BPI is the nation's premier standards development, quality assurance and credentialing organization…See More
13 hours ago
Daniel Cullen replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"Can anyone tell me exactly HOW mold sampling impacts the mold remediation process or protocol? Why…"
14 hours ago
Daniel Cullen joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
14 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service