Adding return air from a heated basement in a high radon area

When building my house in CT, return air ducts are not put into basements because of radon, at least along the coast where radon levels are high. In prepaing for an addition to the house, I will be adding radon remediation. I don't like the pressure differences in the house currently as the basement has supply ducts but no return ducts, and feel that adding returns will help with better more consistent temperatures throughout the house. I'll also be adding an ERV to the current HVAC system during the addition process. I'm curious if anyone has done this process and what the results were.

Views: 1228

Reply to This

Replies to This Discussion

Hi Gary,

As you certainly know, omitting returns in the basement isn't exactly a solution for radon :).  Preparation for radon in new homes is an absolute must for people in locations like yours and mine, problem areas.  Any new home built without such could face a huge penalty when it comes time to sell.  Any major renovation like what your planning is a good time to play catch-up. 

I still remember the first home in our neighborhood that failed a radon test, at least the first I heard about.  I think a haunted house would have been easier to sell.  As time has passed, that fear has switched places with one of not having the remediation in place, now that everyone has accepted that the radon is always going to be there and needs to be taken care of.

Back to your house, if you do a great job of remediation, I would not be worried about the heating system circulating basement air into the house.  If the remaining level is higher than you would like, then isolating the basement with its own HRV and heat is possible. 

Your first step is the remediation and a look at those results.

As for the consistent temperatures throughout the house, that is a process of delivering the right amount of heat to the right places and you are correct that return air is a big part of that. 

Bud

A thorough sealing of the duct system, including the furnace cabinet should do a lot to remove pressure differences from the air handler. Radon issues aside, there are a number of reasons to avoid basement returns.

Greg, what are the numerous reasons you mention?

RSS

Latest Activity

Dannie Jackson liked Allison A. Bailes III's group HVAC
11 hours ago
Dannie Jackson added a discussion to the group Energy Efficient Design
12 hours ago
Dannie Jackson liked Barry NewDelman's discussion Help your Clients save, THEN do what you do best
12 hours ago
Dannie Jackson replied to Barry NewDelman's discussion Whats the Consensus of this group Define "Energy Efficiency" in the group Energy Efficient Design
"Design wise I would say that energy efficiency is defined by the Btu / square foot.  This is…"
12 hours ago
Dannie Jackson joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
12 hours ago
Dannie Jackson liked Chris Laumer-Giddens's group Energy Efficient Design
13 hours ago
Dannie Jackson posted a blog post
14 hours ago
Dannie Jackson liked Home Performance Coalition's blog post Building a Market for High-Performing Homes
15 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service