Timothy Renz's Discussions (11)

Discussions Replied To (9) Replies Latest Activity

"the EC foam is not the ideal product to use in Retro fit attics... we used it a few…"

Timothy Renz replied May 22, 2012 to Does anyone have any experience with an Owens Corning product called "Energy Complete" ?

21 May 23, 2012
Reply by Bruce Navin

"I can agree that the Owens Corning product can easily be applied too thick and creat…"

Timothy Renz replied May 18, 2012 to Does anyone have any experience with an Owens Corning product called "Energy Complete" ?

21 May 23, 2012
Reply by Bruce Navin

"When we use this product we place a laminated technical data sheet in the given area…"

Timothy Renz replied May 14, 2012 to Spray Foam and 2009 IRC codes? Your interpretation?

8 May 14, 2012
Reply by Timothy Renz

"Thanks for the advice Bruce and Kevin, I had a gut feeling that the HVAC system has…"

Timothy Renz replied May 7, 2012 to Indoor Humidity Levels

5 May 18, 2012
Reply by Robert H

"I do not have a full cavity foaming rig, but when I do I sub the work out to a subco…"

Timothy Renz replied May 1, 2012 to Spray Foam and 2009 IRC codes? Your interpretation?

8 May 14, 2012
Reply by Timothy Renz

"One piece of advice is to have an idea of the cost of the recommended repairs to the…"

Timothy Renz replied Mar 29, 2012 to How to help new energy pros migrate into our new career as fresh students right out of class

13 Apr 18, 2012
Reply by Bill Bradbury

"I agree with your preferred option.  If the connected space is climate controlled th…"

Timothy Renz replied Feb 16, 2012 to Treating crawl spaces (with ductwork) when the adjacent basement ceiling is insulated.

4 Feb 17, 2012
Reply by Patrick Michaelyan

"I am also a certified installer of the energy Complete System based out of St. Louis…"

Timothy Renz replied Jan 5, 2012 to Does anyone have any experience with an Owens Corning product called "Energy Complete" ?

21 May 23, 2012
Reply by Bruce Navin

"Thanks Bruce, all great points and I could not agree with you more as far as being w…"

Timothy Renz replied Jan 4, 2012 to Vinyl batt to metal frame ware house

5 Oct 8, 2015
Reply by Hal Skinner

RSS

Forum Discussions

Home Energy Pros and #MeToo

Started by Mike Rogers in General Forum 10 hours ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler yesterday. 34 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Latest Activity

Blake Shurtz posted a discussion

Replacement for Energy Conservatory Flow-blaster

It's too bad that the flow-blaster is no longer being produced or technically supported. Does…See More
4 hours ago
Profile IconBrian Cizmar, Charles Allen, Charles Buell and 1 more joined Home Energy Pros Forum
6 hours ago
Mike Rogers posted a discussion

Home Energy Pros and #MeToo

If it doesn't seem obvious why a discussion of …See More
10 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
yesterday
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
yesterday
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service