Ed Minch's Discussions (148)

Discussions Replied To (129) Replies Latest Activity

"If a window is open 12" and you close it 1/2", have you reduced the amount of air go…"

Ed Minch replied Aug 24, 2012 to What is the value of using a pressure pan to test outlets?

19 Dec 8, 2016
Reply by Kelly

"Pressure is not flow, so even though you might read a 49 at the receptacle, how much…"

Ed Minch replied Aug 23, 2012 to What is the value of using a pressure pan to test outlets?

19 Dec 8, 2016
Reply by Kelly

"Joe I Understand your scenario now - wasn't clear on it before.  Manual J, If I reme…"

Ed Minch replied Aug 10, 2012 to Heat loss from ducts

20 May 12, 2014
Reply by Bob Blanchette

"Joe Wouldn't a supply leak in the CAZ make any pressure problem less bad?  And would…"

Ed Minch replied Aug 9, 2012 to Heat loss from ducts

20 May 12, 2014
Reply by Bob Blanchette

"It may be a little more complicated that that unless you want to talk about rules of…"

Ed Minch replied Aug 9, 2012 to Heat loss from ducts

20 May 12, 2014
Reply by Bob Blanchette

"Pat I have no doubt that the ratio is 1:1, but not all are the identical formula.  W…"

Ed Minch replied Aug 2, 2012 to Sealing Vapor Barriers to Concrete Foundations

14 Dec 13, 2012
Reply by Rob Orchard

"The foam manufacturer's make an extra sticky single part foam - same chemicals as th…"

Ed Minch replied Aug 2, 2012 to Sealing Vapor Barriers to Concrete Foundations

14 Dec 13, 2012
Reply by Rob Orchard

"Many times we have used sign material and it won't blow of 99% of the time. And don'…"

Ed Minch replied Aug 2, 2012 to Suggestions for magnetic air register covers?

12 Aug 10, 2012
Reply by Patrick Michaelyan

"I suppose the potential is there, but after many thousands of retrofits over 32 year…"

Ed Minch replied Jul 20, 2012 to Are we setting ourselves up for a huge liability?

12 Jul 26, 2012
Reply by Michael Matthews

"John I am a little confused.  How will oversizing her heater be a health and safety…"

Ed Minch replied Jul 19, 2012 to Are we setting ourselves up for a huge liability?

12 Jul 26, 2012
Reply by Michael Matthews

RSS

Latest Activity

Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
6 hours ago
Profile IconSean Wiens and David Butler joined Mark Richardson's group
Thumbnail

Renewable Energy

This group will focus on the issues associated with incorporating renewable energy sources like…See More
6 hours ago
Al Tibbs posted photos
7 hours ago
Al Tibbs replied to Bob Krell's discussion What Do You Do When You Find Suspected Mold? in the group Healthy Indoors (IAQ)
"In any case where there is visible mold present, I would begin with a thorough VISUAL assessment of…"
7 hours ago
Al Tibbs joined Bob Krell's group
Thumbnail

Healthy Indoors (IAQ)

The Healthy Indoors group is focused on indoor air quality (IAQ), mold, moisture control, radon,…See More
7 hours ago
David Byrnes posted a blog post

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
8 hours ago
David Butler posted discussions
8 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"Static pressure drop through a straight length of pipe is a function of friction rate, and friction…"
13 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service