Dan Antonioli's Discussions (12)

Discussions Replied To (9) Replies Latest Activity

"Rick, see my reply above."

Dan Antonioli replied May 11, 2016 to Net Zero Energy Hot Water

18 May 12, 2016
Reply by Tom Mallard

"Daniel,  Several years ago I was researching two different systems, one of which I a…"

Dan Antonioli replied May 5, 2016 to Net Zero Energy Hot Water

18 May 12, 2016
Reply by Tom Mallard

"Rich, it always depends on site conditions, but generally speaking the 80% figure is…"

Dan Antonioli replied May 5, 2016 to Net Zero Energy Hot Water

18 May 12, 2016
Reply by Tom Mallard

"Okay, a couple of things. The 1.0 kW per square meter reference is only under the mo…"

Dan Antonioli replied Apr 29, 2016 to Net Zero Energy Hot Water

18 May 12, 2016
Reply by Tom Mallard

"Hi Hans, I don't know where you're located but where I am a 2.5 kw pv system costs c…"

Dan Antonioli replied Apr 29, 2016 to Net Zero Energy Hot Water

18 May 12, 2016
Reply by Tom Mallard

"For my particular application the heat pump heater would be integral to the tank and…"

Dan Antonioli replied Apr 28, 2016 to Net Zero Energy Hot Water

18 May 12, 2016
Reply by Tom Mallard

"Got the catalog with the plug samples. Love it!"

Dan Antonioli replied Apr 19, 2012 to Wooden Plugs For 2" Insulation Holes

18 Apr 20, 2012
Reply by tedkidd

"Wow, 70,000 in two years?! That's a big operation. Most of the homes we work on are…"

Dan Antonioli replied Apr 19, 2012 to Wooden Plugs For 2" Insulation Holes

18 Apr 20, 2012
Reply by tedkidd

"Have you had any problems with the foam plugs? I just got some samples from J&R…"

Dan Antonioli replied Apr 19, 2012 to Wooden Plugs For 2" Insulation Holes

18 Apr 20, 2012
Reply by tedkidd

RSS

Latest Activity

Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
7 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
8 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
9 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
9 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
13 hours ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
13 hours ago
Profile IconBrendan Reid and David Butler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
13 hours ago
Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
21 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service