Bob Sullivan's Discussions (15)

Discussions Replied To (14) Replies Latest Activity

"Which foam? Maybe none. In retirement I do tech work for an aminoplast masonry foam…"

Bob Sullivan replied Oct 30, 2015 to How Would You Weatherize this Historic Home?

11 Nov 12, 2015
Reply by Jesse Erbel

"Caution re: pest infestation is prudent. My experience indicates that pest control m…"

Bob Sullivan replied Oct 29, 2015 to How Would You Weatherize this Historic Home?

11 Nov 12, 2015
Reply by Jesse Erbel

"I live in a 135 years old balloon framed house. Family members live in a 180 years o…"

Bob Sullivan replied Oct 29, 2015 to How Would You Weatherize this Historic Home?

11 Nov 12, 2015
Reply by Jesse Erbel

"InsulSmart is a two-part aminoplast interior foam insulation offered by cfiFOAM, Inc…"

Bob Sullivan replied Nov 1, 2013 to Air sampling low pressure two part foam

4 Nov 1, 2013
Reply by Bob Sullivan

"Aminoplast injection foam is available today that greatly surpasses the old technolo…"

Bob Sullivan replied Nov 8, 2012 to Urea Formaldehyde Foam Insulation (UFFI)

10 Feb 13, 2014
Reply by Thomas Varney

"Whatever R-value loss occur due to fiberglass compression is partially offset by an…"

Bob Sullivan replied Sep 2, 2011 to Slow cure foam injected behind fiberglass in walls?

23 Sep 2, 2011
Reply by Bob Sullivan

"John,   Across the insulation industry, most manufacturers disclose R-values at 75 F…"

Bob Sullivan replied Aug 23, 2011 to Slow cure foam injected behind fiberglass in walls?

23 Sep 2, 2011
Reply by Bob Sullivan

"John,   A nice thing about injection foams is that they more easily flow around pipe…"

Bob Sullivan replied Aug 23, 2011 to Slow cure foam injected behind fiberglass in walls?

23 Sep 2, 2011
Reply by Bob Sullivan

"John, InsulSmart and Tripolymer 105 install similarly. Current and past Tripolymer 1…"

Bob Sullivan replied Aug 23, 2011 to Slow cure foam injected behind fiberglass in walls?

23 Sep 2, 2011
Reply by Bob Sullivan

"Pat, I'll answer your questions one by one, as follows:   Is there some recommendati…"

Bob Sullivan replied Aug 23, 2011 to Slow cure foam injected behind fiberglass in walls?

23 Sep 2, 2011
Reply by Bob Sullivan

RSS

Latest Activity

Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
6 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
7 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
7 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
7 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
11 hours ago
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
12 hours ago
Profile IconBrendan Reid and David Butler joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
12 hours ago
Profile IconSean Wiens and David Butler joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
20 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service