David Meiland's Discussions (148)

Discussions Replied To (130) Replies Latest Activity

"Well, it has everything to do with how much time and money you're given to set up an…"

David Meiland replied Apr 11, 2013 to Blower Door Testing

5 Apr 11, 2013
Reply by Curt Kinder

"Definitely a problem. If the house has a flat ceiling, then the best thing is for th…"

David Meiland replied Apr 8, 2013 to Blower Door Testing

5 Apr 11, 2013
Reply by Curt Kinder

"I think the hardest part (if you want a grade-A installation) is having a mechanical…"

David Meiland replied Mar 27, 2013 to Affordable, effective and easy to install HRV?

7 Mar 28, 2013
Reply by John Nicholas

"Some people seem to like the Panasonic spot ERV. Other than that, there's nothing pa…"

David Meiland replied Mar 27, 2013 to Affordable, effective and easy to install HRV?

7 Mar 28, 2013
Reply by John Nicholas

"Paul, you say "warping" but I assume you mean cupping. Which way, up or down? Or, is…"

David Meiland replied Mar 24, 2013 to Looking for a cure for a warping hardwood floor not caused by a leak

17 Apr 18, 2013
Reply by Ed Minch

"It seems like the device installed by the utility would allow them to prevent resist…"

David Meiland replied Mar 22, 2013 to Heat Pump Problem - Aux mode

5 Mar 25, 2013
Reply by Austin Brown

"Are you saying that there's not a block or poured concrete wall in the middle of all…"

David Meiland replied Mar 7, 2013 to HELP - AIR SEALING a Continuous Stone Interior/ Exterior Wall

16 Mar 17, 2016
Reply by Mick Lane

"I found this piece entertaining http://www.greenbuildingadvisor.com/blogs/dept/musin…"

David Meiland replied Mar 1, 2013 to What is COSTCO doing?

31 Mar 1, 2013
Reply by Jerry Lahr

"I may not have read the description carefully enough, but it sounds like the new ins…"

David Meiland replied Feb 28, 2013 to Frozen Pipes on Interior Wall

7 Mar 14, 2013
Reply by Michael Jensen

"Take a look at Pemko. They have good technical info on their site. The 4301 model ma…"

David Meiland replied Feb 23, 2013 to installing automatic door sweeps

5 Mar 1, 2013
Reply by Colin Choney

RSS

Forum Discussions

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by Brad Cook 1 hour ago. 27 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Dirty solar panels

Started by Evan Mills in General Forum. Last reply by Stacie Bagnasco Oct 16. 1 Reply

Latest Activity

Brad Cook replied to David Butler's discussion How would you insulate this roof?
"Bill, you just posted a number of responses in different areas of the thread. I will try to respond…"
1 hour ago
Donald Hester liked Marc Tannenbaum's blog post 3 Issues HVAC contractors Should Know About Impacting Customer Comfort and Health
1 hour ago
Profile IconAlice Quinn and Donald Hester joined Home Energy Pros Forum
2 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"In an earlier response, I noted that we COULD haul drinking water and use the water we collect off…"
2 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"As to the elevations on the cupola – the existing windows up there might survive adding…"
2 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The purlins are 1 3/4" thick. I believe the top chord of the trusses are 10" deep (but…"
2 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The cupola windows are the only place there would be a problem if 4" of foam were added above…"
2 hours ago
Bill Spikowski replied to David Butler's discussion How would you insulate this roof?
"The purlins are 1 3/4" thick. I don’t know about the fire dangers of PIC or other foams.…"
2 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service