Pat Dundon's Discussions (100)

Discussions Replied To (81) Replies Latest Activity

"Remember the 'floor' of the attic has a thickness. If there is a floor deck that has…"

Pat Dundon replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"Ask if they ever noticed it running after the foam was installed. Houses are forgivi…"

Pat Dundon replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"If you have 2 AC systems in a 3000 sf house with a foamed in roof you have too much…"

Pat Dundon replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"How big is this house? Where is the house? 1500 HDD or 7000 HDD? Does the client nee…"

Pat Dundon replied Aug 17, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"Most closed cell foam manufacturers have improved their foam so it does not require…"

Pat Dundon replied Aug 16, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"usually you are running an exhaust fan while we do the work, and we hacve occasional…"

Pat Dundon replied Aug 9, 2012 to Sealing Vapor Barriers to Concrete Foundations

14 Dec 13, 2012
Reply by Rob Orchard

"i haven't heard of this before.  as far as I know all urethanes are 1:1 ratio, so i…"

Pat Dundon replied Aug 2, 2012 to Sealing Vapor Barriers to Concrete Foundations

14 Dec 13, 2012
Reply by Rob Orchard

"The EPDM can be purchased at 40 mils and 60 mils. I use the 40, over the past couple…"

Pat Dundon replied Jul 27, 2012 to Sealing Vapor Barriers to Concrete Foundations

14 Dec 13, 2012
Reply by Rob Orchard

"Don't use poly, use EPDM roofing material. Then you can use sprayfoam to seal."

Pat Dundon replied Jul 26, 2012 to Sealing Vapor Barriers to Concrete Foundations

14 Dec 13, 2012
Reply by Rob Orchard

"This is a nosy new yorker pitching in.  I was in Vegas recently and riding the monor…"

Pat Dundon replied Jun 15, 2012 to Insulating rooftop ducts with spray foam - retro - hot/dry climate

15 Jun 15, 2012
Reply by Pat Dundon

RSS

Latest Activity

Jonathan Beers posted a discussion

MGE hiring for my job

I'm retiring next spring, and MGE is hiring:…See More
12 hours ago
Summer Reyes's blog post was featured

Equipment We Use: Detecting Water With Infrared Cameras

You know water is somewhere on the property, you can smell the mildew, but can't determine the…See More
13 hours ago
Profile IconGlenn Hourahan and Joseph Frasier joined Home Energy Pros Forum
13 hours ago
Alfredo Baccari added a discussion to the group Job Board
Thumbnail

HERS or/and BPI Energy Inspector in SF Bay Area (SAN JOSE, CA).

ELEM3NTS is a leading energy efficient consulting company specializing in residential homes. We…See More
14 hours ago
Alfredo Baccari joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
15 hours ago
David Byrnes's blog post was featured

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
18 hours ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
yesterday
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service