George M. Matthews's Discussions (28)

Discussions Replied To (20) Replies Latest Activity

"Do not lease it from Pawnee leasing. Try to find equipment from a contractor getting…"

George M. Matthews replied Aug 11, 2011 to Energystar V.3 Diagnostic Equipment

8 Aug 11, 2011
Reply by Marshall Newport

"I've got two "pool" clients in Contra Costa County. One is thrilled that he replaced…"

George M. Matthews replied Jul 21, 2011 to How's the water? Managing energy use in Pools.

12 Jul 21, 2011
Reply by Mike Estupinian

"1923 central Berkeley one story two bed, one bath. 5 inches cellulose in attic. No w…"

George M. Matthews replied Jun 13, 2011 to Prevailing insulation levels - what do you see in the field?

5 Jun 14, 2011
Reply by Joseph Lamy

"Here is your fix. Require infrared testing of each job wanting govt money as rebates…"

George M. Matthews replied Jun 11, 2011 to Rebate programs for injection foam? Not sure.

17 Jun 12, 2011
Reply by Erin Buchanan

"Assessed 6.11.11 1954 Tract house, Pleasant Hill, CA 3 inches of cellulose in ceilin…"

George M. Matthews replied Jun 11, 2011 to Prevailing insulation levels - what do you see in the field?

5 Jun 14, 2011
Reply by Joseph Lamy

"I could still use some clarification on the subject. I seem to remember reading that…"

George M. Matthews replied Jun 2, 2011 to Blown fiberglass + blown cellulose

19 Jun 4, 2011
Reply by Joseph Lamy

"George, That is exactly what you want to do, cover the fiberglass and bring it to R3…"

George M. Matthews replied May 31, 2011 to Blown fiberglass + blown cellulose

19 Jun 4, 2011
Reply by Joseph Lamy

"I have a question about how to create a termite viewing area in a PU spray foamed fo…"

George M. Matthews replied May 13, 2011 to Sealing crawlspaces and insulating them with polyurethane foam

16 May 13, 2011
Reply by David Meiland

"My client has a 2300 sf single story house with a perimeter concrete foundation on e…"

George M. Matthews replied May 2, 2011 to Sealing crawlspaces and insulating them with polyurethane foam

16 May 13, 2011
Reply by David Meiland

"My local plumbing supply store just recommended  a Promax GNR 40 in the $500 range w…"

George M. Matthews replied Apr 28, 2011 to Budget Water Heater efficiency upgrades - What works best?

6 May 2, 2011
Reply by Joseph Lamy

RSS

Latest Activity

Dannie Jackson liked Allison A. Bailes III's group HVAC
7 hours ago
Dannie Jackson added a discussion to the group Energy Efficient Design
7 hours ago
Dannie Jackson liked Barry NewDelman's discussion Help your Clients save, THEN do what you do best
8 hours ago
Dannie Jackson replied to Barry NewDelman's discussion Whats the Consensus of this group Define "Energy Efficiency" in the group Energy Efficient Design
"Design wise I would say that energy efficiency is defined by the Btu / square foot.  This is…"
8 hours ago
Dannie Jackson joined Chris Laumer-Giddens's group
Thumbnail

Energy Efficient Design

Energy efficiency starts at the drafting table...How architects and designers can help buildings…See More
8 hours ago
Dannie Jackson liked Chris Laumer-Giddens's group Energy Efficient Design
8 hours ago
Dannie Jackson posted a blog post
9 hours ago
Dannie Jackson liked Home Performance Coalition's blog post Building a Market for High-Performing Homes
10 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service