Dale Sherman's Discussions (27)

Discussions Replied To (20) Replies Latest Activity

"Good suggestions from everyone here.  Chances are good that you could point your inf…"

Dale Sherman replied Jan 15, 2016 to High-use headscratcher

16 Feb 5, 2016
Reply by Mick Lane

"Here is a more detailed article about the incident.  Rescuers measured 1,000 ppm in…"

Dale Sherman replied Feb 13, 2015 to CO poisoning in Yarmouth Maine

8 Feb 19, 2015
Reply by Stan Kuhn

"Home Energy Magazin has a picture of how to use a box to measure flow at a range hoo…"

Dale Sherman replied Oct 16, 2013 to Range Hood Draft

22 Oct 18, 2013
Reply by Roman

"A lot of questions requiring some lengthy answers, but I’ll try to keep them concise…"

Dale Sherman replied Oct 16, 2013 to Implementing ASHRAE 62.2

14 Oct 19, 2013
Reply by Thom Knoll

"Very convenient web tool, Rick, makes it easy to run the calculations.  I'm glad to…"

Dale Sherman replied May 7, 2013 to ASHRAE 62.2-2013 released

5 May 8, 2013
Reply by Rick Karg

"Generally, the older the house, the nastier the basement.  If we do a good job of ai…"

Dale Sherman replied Mar 28, 2013 to Basements and BAS

16 Apr 11, 2013
Reply by Pat Dundon

"A balanced and reasonable strategy from BPI would be to require a triennial review a…"

Dale Sherman replied Mar 5, 2013 to BPI Introduces New Renewal Policy for Certified Home Performance Professionals

15 Mar 7, 2013
Reply by Robert vanCreveld

"Rick Karg has instructions for using a pitot tube to assess airflow in ducts. His we…"

Dale Sherman replied Feb 7, 2013 to Measuring fresh air intake ducted to a return and no way of measuring from outside.

22 Feb 7, 2013
Reply by Dale Sherman

"Wonderful input here from everyone. Iain, Paul, Rick, I know you've worked long and…"

Dale Sherman replied Jan 31, 2013 to ASHRAE 62.2.2010 and the $20 app

35 May 10, 2013
Reply by Jim Peck

"LEDs are pulsed on/off to get the maximum light from them while avoiding overheating…"

Dale Sherman replied Dec 20, 2012 to LED's interfering with Garage Door Openers

12 Dec 3, 2015
Reply by Dennis Heidner

RSS

Latest Activity

Alfredo Baccari joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
57 minutes ago
David Byrnes's blog post was featured

Strategies for Hiring and Interviewing for Home Performance Professionals

Hire slow and fire fast.  It’s a phrase that experienced managers and human resources professionals…See More
3 hours ago
Dara Bowser replied to Don Fugler's discussion joining ducts in the group HVAC
"Good to hear you have clean dryer ducts Don. The dryer duct issues that we run into are…"
19 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"David, If the IMC mandates metal dryer duct and prohibits metal screws, they must be accepting…"
20 hours ago
David Butler replied to Don Fugler's discussion joining ducts in the group HVAC
"I never checked that before. Checking now... Section M1502.4.2 of the International Residential…"
21 hours ago
Joseph Frasier is now a member of Home Energy Pros Forum
21 hours ago
Don Fugler replied to Don Fugler's discussion joining ducts in the group HVAC
"Brendan, Thanks for that response. Because of your warning, I just went down to the basement and…"
yesterday
Brendan Reid replied to Don Fugler's discussion joining ducts in the group HVAC
"Hi Don, Summary: DRYER VENT: screws bad idea, possibly prohibited by code. METAL DUCT: must be…"
yesterday

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service