tedkidd's Discussions (476)

Discussions Replied To (380) Replies Latest Activity

"Remember, a leaky house doesn't mean high IAQ, in fact it often means just the oppo…"

tedkidd replied Aug 24, 2012 to “I don’t get it why would we want to make the house so tight that you would need ventilation?”

45 Sep 8, 2012
Reply by Jim Shankle

"Nice Dale!  We didn't realize how dumb some of these "sayings" were until someone e…"

tedkidd replied Aug 24, 2012 to “I don’t get it why would we want to make the house so tight that you would need ventilation?”

45 Sep 8, 2012
Reply by Jim Shankle

"My bad.  I thought you wanted help.  Rereading your OP it was venting, not asking fo…"

tedkidd replied Aug 23, 2012 to “I don’t get it why would we want to make the house so tight that you would need ventilation?”

45 Sep 8, 2012
Reply by Jim Shankle

"$1.50 a month buddy, not a day. Tempo and tone of delivery, and NOT telling the cli…"

tedkidd replied Aug 23, 2012 to “I don’t get it why would we want to make the house so tight that you would need ventilation?”

45 Sep 8, 2012
Reply by Jim Shankle

"Glen, When they say asinine things you need to point it out, not give it credence.…"

tedkidd replied Aug 20, 2012 to “I don’t get it why would we want to make the house so tight that you would need ventilation?”

45 Sep 8, 2012
Reply by Jim Shankle

"With the advent of PROPERLY SIZED, staged or modulating equipment, which operates  c…"

tedkidd replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"We know they need heat, the thing has been running.   1000 sf may mean quite a few…"

tedkidd replied Aug 20, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"  These people are at a major crossroad here.  You are both consultant and contract…"

tedkidd replied Aug 17, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

"Nice.  That picture and your post are my light bulb of the day.   I'm also grateful…"

tedkidd replied Aug 16, 2012 to Any thoughts on the Aeroseal product?

15 Aug 23, 2012
Reply by Bob Blanchette

"Certainly money can be spent on solutions that will end up using more energy, but is…"

tedkidd replied Aug 16, 2012 to Open combustion furnace in an attic that has been sealed at the end walls and roof.

35 Aug 24, 2012
Reply by Patrick Michaelyan

RSS

Forum Discussions

Home Energy Pros and #MeToo

Started by Mike Rogers in General Forum 1 hour ago. 0 Replies

How would you insulate this roof?

Started by David Butler in General Forum. Last reply by David Butler 16 hours ago. 34 Replies

Psychrometric Chart Training

Started by John Krochmalny in Training. Last reply by Mahendra Shah on Friday. 1 Reply

Latest Activity

Mike Rogers posted a discussion

Home Energy Pros and #MeToo

If it doesn't seem obvious why a discussion of …See More
1 hour ago
Profile IconCharles Buell, Robert Cowell, Alice Quinn and 1 more joined Home Energy Pros Forum
7 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Sean Lintow proposed rails and clips (re: first comment in this discussion), but in the context of…"
16 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"I missed where the suggestion for rails came in. The plywood would not need any rails. 4+ inches is…"
20 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"I'm a little confused about the necessity and purpose of using support rails if working on…"
20 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"If you insulate master bedroom and family room from below, you definitely need more R-value than…"
20 hours ago
David Butler replied to David Butler's discussion How would you insulate this roof?
"Brad, I was only talking about using EPS between the ridges, if necessary, to conform to bolts.…"
20 hours ago
Brad Cook replied to David Butler's discussion How would you insulate this roof?
"It kind of depends on the PIC. Not all insulation is made the same. Here in VT (and all of New…"
21 hours ago

Photos

  • Add Photos
  • View All

© 2017   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service