John Snell's Discussions (1)

Discussions Replied To (14) Replies Latest Activity

"It is certainly possible as I no longer have the exact specs for the older windows.…"

John Snell replied Aug 25, 2011 to New York first passivhaus ...

4 Aug 25, 2011
Reply by John Snell

"Here is another image showing R=10 windows (Serious brand) on the right and conventi…"

John Snell replied Aug 21, 2011 to New York first passivhaus ...

4 Aug 25, 2011
Reply by John Snell

"You should be skeptical, Davide!! Something is clearly not right. Windows are about…"

John Snell replied Aug 21, 2011 to New York first passivhaus ...

4 Aug 25, 2011
Reply by John Snell

"Typically there are several reasons "hot work" is not as easy as working with cooler…"

John Snell replied Jul 1, 2011 to Using thermal imagers in the summer

5 Jul 8, 2011
Reply by Tyson Pischel

"The 3F delta is for locating air leakage under RESNET. For locating insulation issue…"

John Snell replied Jun 30, 2011 to Using thermal imagers in the summer

5 Jul 8, 2011
Reply by Tyson Pischel

"Thanks for the "master" plug! I hope I can meet expectations. Jeezopeets! Anyway, it…"

John Snell replied Apr 2, 2011 to Expert Eye Needed

17 Nov 15, 2014
Reply by Ed Minch

""It would not be easy to inspect a completed house and assign an insulation grade wi…"

John Snell replied Mar 6, 2011 to Certification for RESNET Thermographers

12 Mar 22, 2011
Reply by Mark Cleminson

""This house will not allow me to depressurize" I'm not sure what the issues are, and…"

John Snell replied Jan 1, 2011 to Thermal imaging while foam is being installed...possible?

5 Jan 3, 2011
Reply by George W. Reynolds

"I'm assuming the is spray-allied foam rather than injected and also assuming the out…"

John Snell replied Jan 1, 2011 to Thermal imaging while foam is being installed...possible?

5 Jan 3, 2011
Reply by George W. Reynolds

"Corrugated and galvanized metal siding on a building with a handicap ramp and railin…"

John Snell replied Dec 17, 2010 to Infrared Image - What is it?

6 Apr 26, 2012
Reply by Dale Sherman

RSS

Discussion Forum

Having some fun with our cameras

Started by Mike Pagozalski. Last reply by Mike Pagozalski Jul 31, 2017. 2 Replies

Expert Eye Needed

Started by Matthew P. Last reply by Ed Minch Nov 15, 2014. 17 Replies

Google Thermal View?

Started by Joshua Knittel. Last reply by tedkidd Jun 1, 2013. 4 Replies

Infrared Image - What is it?

Started by Fluke Thermal Imaging. Last reply by Dale Sherman Apr 26, 2012. 6 Replies

Latest Activity

Brett Little posted an event
Thumbnail

Green Rater LEED Credential Online Training at Online

September 5, 2018 at 12pm to September 6, 2018 at 5pm
With over 450,000 LEED® for Homes™ spaces worldwide, LEED is the international rating system to…See More
1 hour ago
Michael Schettine commented on Michael Schettine's video
Thumbnail

AccuFrame Water Test

"The Like button doesn't work on this site..."
13 hours ago
Franco Oyuela commented on Mike Muras's blog post "Practical Standards to Measure HVAC System Performance" Rob "Doc" Falke 04/17/2006
"It's important to evaluate and inspect a system regularly to make sure it's at optimal…"
19 hours ago
Seventhwave posted an event

HVAC technology enhancements for energy conservation at The Marq

October 4, 2018 from 8:30am to 4pm
Join us to learn how to get the largest energy savings in your commercial buildings. HVAC as a…See More
23 hours ago
Peter Krych replied to Dav Camras's discussion Adding blown insulation to poorly installed batts?
"I agree, it is wasteful to remove and dump old insulation. I still does its job. Air sealing is…"
yesterday
Michael Schettine commented on Michael Schettine's video
Thumbnail

AccuFrame Water Test

"With the conversion rate that- air is 800 time LESS dense than water at sea-level…"
yesterday
Michael Schettine posted a video

AccuFrame Water Test

In this short video, water is used to visualize air leakage sites that are present in the majority of framed walls in the US. New regulations require better ...
yesterday
Sam Feder liked Dav Camras's discussion Adding blown insulation to poorly installed batts?
yesterday
Chris Stratton liked Don Fugler's discussion Choosing a range hood
yesterday
Dave Taylor replied to Jerry Needham's discussion VERY TIGHT HOME WITH OVER SIZED AC
"Jerry, you should look at Buildingscience.com" High Mass Walls" 105 paper for more…"
yesterday
Jill Lindman's 3 events were featured
yesterday
Jill Lindman posted events
yesterday
Diane Chojnowski posted videos
yesterday
Don Fugler replied to Don Fugler's discussion Choosing a range hood in the group Kitchen Ventilation
"Has anyone installed a range hood in an older home with the ducting down to the basement and out…"
Thursday
Profile IconEileen Kraus-Dobratz, VENI MITTAL and Mark A McCrumb joined Home Energy Pros Forum
Thursday
Brian Robinson replied to Dav Camras's discussion Adding blown insulation to poorly installed batts?
"YES, YES, & YES!!! Bat droppings, mouse droppings, dead mice, nuts, seeds, acorns, lack of…"
Wednesday
Matt Peterson posted a blog post

The Importance of keeping Professionally Trained Gas Line Installation Technicians happy and loving their jobs!

Our company is very much a family to us, we strive to bring in and develop great people into great…See More
Wednesday
Profile Iconyanky fogel, Kathleen Krebs, Nicholas Rubenstein and 3 more joined Home Energy Pros Forum
Wednesday
yanky fogel liked Home Energy Magazine's video
Tuesday
Franco Oyuela commented on Shawn Weeks's blog post How Homeowners Can Keep Electricity Costs Down in Summer Months
"Cutting back on air conditioning is also good for the environment because it reduces carbon…"
Tuesday

Photos

  • Add Photos
  • View All

© 2018   Created by Home Performance Coalition (HPC)   Powered by

Badges  |  Report an Issue  |  Terms of Service